Xpwr T3910 Motor
Weight: 166 grams (including radial mount and prop adapter)
Length: 42mm (from rear of radial mount to front face of prop adapter)
Diameter: 46mm
KV: 820
Pole: 18
4S Lipo (80 Amp ESC recommended)
Recommended prop: 15 x 7 or 14 x 8 beechwood - ELECTRIC PROPS ONLY Maximum temperature (on outside of motor): 175F / 80C
When pairing the Xpwr T3910 with an Airboss Elite 80 Amp ESC, timing must be set to high on the Airboss 80.
Xpwr 22CC Motor
Weight: 334 grams (including radial mount and prop adapter)
Length: 65mm (from rear of radial mount to front face of prop adapter)
Diameter: 49mm
KV: 500 Max
Current: 80 Amp
Shaft: M8 x 1.25
Pole Count: 14Recommended
Props: 16x7, 16x8, 17x6 wood or lightweight carbon electric props.
Please avoid the heavier APC props in this size.
XPWR 32CC motor:
Weight: 550 grams (including radial mount and prop adapter)
Length: 80mm (from rear of radial mount to front face of prop adapter)
Diameter: 60mm
KV: 220 Max
Props: 19x10, 20x8 wood or carbon electric
Lipo: 12s 3300-4400mah Max watts: 3600
Max amps: 85 Castle ESC setup: Firmware 4.22
Motor Timing: Normal (5)
XPWR 35CC motor:
Weight: 774 grams (including radial mount and prop adapter)
Length: 82mm (from rear of radial mount to front face of prop adapter)
Diameter: 80.8mm
KV: 220 Max
Shaft: M10 x 1.5
Pole Count: 24 Stator Poles
Props: 20 x 10, 20 x 12, 21 x 10 beechwood - ELECTRIC PROPS.
12S Lipo operation and 120 Amp HV speed controller minimum.
Bullet connectors: 6.5 mm female installed
Xpwr 40CC Motor
Weight: 870 grams (including radial mount and prop adapter)
Length: 86mm (from rear of radial mount to front face of prop adapter)
Diameter: 80.8mm
Shaft: M10 x 1.5
KV: 200
Pole: 24 Stator Poles
Bullet connectors: 6.5 mm female installed,
male bullet connectors included
12S Lipo operation and 120 Amp HV speed controller minimum.
Recommended prop: 21 x 10, 21 x 12 or 22 x 10 beechwood - ELECTRIC PROPS ONLY
Bullet connectors: 6.5 mm female installed
Maximum temperature (on outside of motor): 175F / 80C
XPWR 60CC motor:
Weight: 1168 grams (including radial mount and prop adapter)
KV: 190
Length: 97mm (from rear of radial mount to front face of prop adapter)
Diameter: 80.8mm
Shaft: M10 x 1.5
Pole: 24
connectors: 8.0 mm female installed,
male bullet connectors included10mm Prop Shaft
Recommended prop: 23 x 10, 24 x 10, 24 x 12
Bullet connectors: 6.5 mm female installed
Maximum temperature (on outside of motor): 175F / 80C
